Hearth Pad Pedestals | CAM DeSigns, LLC

Pedestals for Hearth Pads

Matching pedestals are available for all sizes and shapes. Pedestals are offered in tile, slate, stone or brick and are designed and built to be slightly smaller than the hearth pad. The hearth pad will overhang the pedestal on all sides.

Standard Pedestal - 6" Height

Available with or without thermal value: No thermal value – pedestal will include a 3/4" solid top surface (not just framing)
Thermal Value Pedestal: R-Value of 2.08 includes 1" mineral fiberboard, R-Value of 3.12 includes 1½" mineral fiberboard
These two options when combined with the hearth pad will increase the total R-Value to a minimum of 3.67 and 4.71 respectively
Solid surface 3/4" and is installed under the mineral fiberboard and is not included in the R-Value rating

Note: Pedestals are available in all tile/slate/stone options (not just the three shown).

Low-Profile Pedestal

Two layers of mineral fiberboard installed in our Original Edge 1" frame raises the R-Value by 2.08 for a total R-Value of 3.67 or 4.32 depending on the frame of the hearth pad
Designed and built to be slightly smaller than the hearth pad - makes a great base for installations on thick carpet and/or padding
Available for use with either of the Original Edge or the Classic Edge frames

Note: Low-Profile Pedestal shown. The two parts are sold separately (pad on top and low-profile on the bottom).

Call: 541.605.0456
Email: camdesignsllc@gmail.com
Read our privacy policy...