Osburn, Inspire 2000 Wood Stove (medium heating unit) (requires- Side Panel and Base)
Are you interested in getting off the beaten path? The Inspire offers a style that will surely withstand variable trends with these pure lines of balanced proportions, allowing the brand Osburn to easily compare to European-style products. This more contemporary look is available on steel base, soapstone or even a minimalist base for those who prefer to place the unit directly on a non-combustible podium. Equipped with a 2.3 cubic feet firebox and an outside air intake, this unit will meet the requirements of domestic energy standards, not to mention that a mobile home installation is permitted.
The Inspire largely meets EPA requirements with emissions as low as 1.54 g/h and complies with the most stringent North American requirements. A guarantee of quality, reliability and durability, once again Osburn clearly demonstrates its firm commitment to the environment to the delight of wood heating fans.
Download Manual
Download Spec Sheet
Download Minimalist Base Kit Installation Instructions
Download Steel Base Kit Installation Instructions
Download Soapstone Base Kit Installation Instructions
Appliance Information
| Fuel type : | Dry cordwood (16" recommended) | |
| Recommended heating area-ft² : | 500 - 2,100 | |
| Overall firebox volume-ft³ : | 2.4 | |
| EPA loading volume-ft³ : | 2.02 | |
| Maximum burn time : | 8 h | |
| Maximum heat output-dry cordwood : | 75,000 BTU/h (22.0 kW) | |
| Overall heat output rate < : | 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW) | |
| Average overall efficiency (dry cordwood) : | 69% (HHV) | 74 % (LHV) |
| Optimum overall efficiency : | 77 % | |
| Optimum heat transfer efficiency : | 75 % | |
| Average particulate emissions rate : | 1.54 g/h | |
| Average CO : | 89.4 g/h | |
General Information
| Combustion technology | Non-catalytic |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Maximum log length | 20" |
| Log positioning | Loading over width |
| Chimney diameter | 6" |
| Flue outlet diameter | 6" |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height (feet) | 12' |
| Baffle type | C-Cast or equivalent |
| Approved for an alcove installation | Yes |
| Approved for a mobile home installation | Yes, with fresh air intake |
| Shipping Weight | 537 lb (244 kg) |
| Door type | Single, glass with steel frame |
| Glass type | Ceramic glass |
Required Accessories:
-Decorative side panel kit
-Minimalist, steel, or soapstone base
 Minimalist Base Kit |
 Steel Base Kit |
 Soapstone Base Kit |